The combined Sounder-Strobe CWSS-RR-S3 has 32 different tones, all of which have been tested according to EN 54-3. The tone is selected via DIL switches. If the sounder is actuated via 2 control panel outputs, it can also be operated with an alternative tone. In this way, multi-stage alarming with 2 different tones can be implemented. The sound level is adjusted in 2 steps, by means of a DIL switch
Thanks to the use of LEDs, the strobe with clear cap and red light has a very long lifespan and a low power consumption. The strobe has been tested according to EN 54-23 Class O (“open class”). Due to the lower illuminated room volume, as compared to classes W+C, the signalling device is not suitable for two sense evacuation. It is used for applications where additional optical alarming is desired. Thanks to the optimized design of the cap, the strobe evenly emits light in all directions, and therefore it can be mounted in any orientation
Different tones (e.g., Slow Whoop tone, DIN 33404 tone, continuous tone 800Hz
Alternative tone for two-stage alarming possible
High sound level of more than 100dB, 2 selectable levels
Synchronisation of the sounder tones and flash pulses
Wide operating voltage range
Optional theft protection by means of screw
Suitable for surface mounting
Reviews
There are no reviews yet.